This self priming waterbed pump kit works fast to drain any waterbed and it doesn’t matter how big or small your waterbed is. It comes complete with all the connectors and clips, all you need to do is a little assembly. Just make sure all the joints are nipped up tight. It can drain an average waterbed in around 20 minutes depending on your outlet hosepipe diameter. There is no worrying whether this waterbed pump can drain your bed, it does it with ease.
What’s Included?
- Inlet connector included (for 1″ bore suction hose provided).
- 2 meters of 1″ collapse resistant suction hose and mattress connector included.
- 2 x 1″ Jubilee clips.
- 1x 1″, 3/4″ and 1/2″ multi bore waste water hose adapter included, with this adapter you can use your 1/2″ garden hose, or a 3/4″ or 1″ hose.
- Instructions to drain your bed included.
- Instructions for the pump included.
- One year guarantee.
- 230v 50hz 800 Watts self priming water pump.
- Maximum Output is 3180 litres an hour. (Average waterbed draining time 20 min)
- Maximum lift is 8mtrs, Maximum head is 40mtrs.
- Tough anti-corrosion and rust proof construction
- Fully chlorine resistant
- Long-life double insulated impeller
- Water resistant on/off switch.
- U.K. 3pin moulded plug fitted.
- Carry handle
- As used by Our Fitters.
Briefly all you do is:-
- Screw the multi-bore adaptor onto the outlet on TOP of the pump. Then push on your own hose pipe for the waste water and secure with your own jubilee clip (We recommend a 3/4″ waste water hose rather than the standard 1/2″ garden hoses).
- Secure the other end of the waste water hose to your draining place or take it outside and secure to a drain.
- Screw the black attachment on the 1″ suction hose on to the front inlet of the pump, tighten the Jubilee clip.
- Screw the blue mattress adaptor at the other end of the suction hose onto your mattress.
It is recommended the pump be connected to the electrical supply via a Residual Current Device (RCD).
Lorraine Graham –
I just wanted to say thank you for the help regarding my decision to buy the best drain and pump system for my recent house move.
It clearly is a superb system and it had my KS water bed drained in 20 mins.
I had to delay setting the bed up in my new property due to work needed in the house and also painting etc., but happy to report the pump worked like a dream in reverse and I have my water bed back.
Ken –
This is a great pump. It only took 15 minutes to drain my king bed down. Just wish i’d of gone for the thick outlet hose pipe instead of using my own.