How to Keep Your Waterbed Smelling Fresh

In the very unlikely event that your waterbed mattress starts to get an odour, fortunately, eliminating the odour is straightforward when using a two-bottle system: one bottle for internal treatment poured directly into the mattress, and one bottle for surface cleaning used alongside a new microfibre cloth.

Here is your complete guide to neutralizing odours and restoring freshness to your bedroom.

The Two-Step Odour Solution

  • Internal Odour: To eliminate internal smells, follow the directions on your first bottle label to treat the water inside the mattress.

  • Surface Odour: Use your second bottle of Odour Control alongside a new, slightly damp microfibre cloth to clean the exterior vinyl and safety liner. Using a brand-new cloth ensures no harsh chemical residue from other household cleaners contaminates the mattress and causes further odours.

Step-by-Step Instructions for Surface Odour Removal

Before beginning either process, always unplug your heater(s) and allow the mattress to cool down completely, then remove all bedding.

For a Single Waterbed Mattress:

  1. Clean the Surface: Start by gently dusting off the mattress surface.

  2. Apply Cleaner: Pour half of the bottle of Odour Control onto a new and slightly damp microfibre cloth.

  3. Wipe Down: Rub the cleaner into the entire surface of the mattress, working outwards from the centre. Make sure to also wipe down the sides of the mattress and the safety liner.

  4. Allow to Dry: Continue wiping until the surface is more or less dry, then leave the mattress to air-dry completely.

  5. Repeat: The following night, repeat the process with the remaining half of the bottle.

  6. Finish: Once the mattress is completely dry, plug the heater back in, turn it to 27°C, and remake your bed with clean bedding.

(Note: The smell may take a number of days to fully neutralise!)

For a Dual Waterbed Mattress System:

  1. Clean the Surface: Start by dusting off each mattress.

  2. Apply Cleaner: Pour a quarter of the bottle of Odour Control onto a new and slightly damp microfibre cloth.

  3. Wipe Down: Rub it into the surface of one mattress, working outwards from the centre, and wipe down the sides as well.

  4. Wipe Down: Repeat the application and wiping process for the second mattress, ensuring the safety liner is also wiped down.

  5. Allow to Dry: Continue wiping until each mattress is more or less dry, then leave both to air-dry completely.

  6. Repeat: The following night, repeat the process with the remaining cleaner for each mattress.

  7. Finish: Once the mattresses are completely dry, plug the heaters back in, turn them to 27°C, and remake your bed with clean bedding.

(Note: The smell may take a number of days to fully neutralise!)

Why has my mattress started to smell?

This is usually caused by dirty water that has contaminated the mattress upon filling or topping up the water level. Then ineffective waterbed conditioner not able to stop stagnant water activity inside, or a buildup of dust and body oils on the exterior vinyl surface combine with the use of cleaning agents that should be kept away from waterbed mattresses.

Also household cleaners can damage the vinyl and cause smells, please read our blog about “What to Clean a Waterbed Mattress With (and When)”.

Would it help by adding Waterbed Conditioner?

The short answer is yes, but not inferior conditioner products. Shock Premium waterbed conditioner helps along with Bubble Stop/Air care. The combination of all three is best at eliminating that rare smell as bubble stop is designed to stop the bacteria from breading. Please read our blog about How, When, and Why You Should Add Conditioner to Your Waterbed.

Keep Your Bed Fresh with Aquaglow

Don’t let a lingering smell disrupt your night’s sleep. Pick up your Aquaglow Odour Control and Maintenance Kits today directly from Aquaglow Waterbeds for fast UK delivery and keep your sleeping environment fresh year-round.

How to keep your waterbed smelling fresh

How to Keep Your Waterbed Smelling Fresh

Posted:

Last updated:

Author adam

Posted in:
Waterbed Care & Maintenance Hub
Tagged :

Got Something To Say?