Water Pump full kit.

Features

If you want to open the box and have a "complete draining kit" to drain your bed, then this is what you need. Briefly all you do is

1. Push the 3/4" waste water hose onto the pump and tighten the Jubilee clip.
2. Secure the other end of the waste water hose to your draining place or take it outside and secure to a drain.
   
3. Push the 1" suction hose on to the inlet of the pump, tighten the Jubilee clip.
4. Screw the mattress adaptor at the other end of the suction hose onto your mattress.

• Inlet (for 1" bore suction hose) included.
• 2 meters of 1" collapse resistant suction hose and mattress connector included.
• 2x 1" Jubilee clips included
  
• 10 meters of 3/4" waste water hose included
• 1x 3/4" Jubilee clip included
  
• 1x 3/4" hose adapter included.
• Instructions to drain your bed included.
• Instructions for the pump included.
• One year guarantee.
• 230v 180 Watts (low wattage) pump.
• Maximum output 60 litres a minute (3600 litres an hour)
• Manufactured from corrosion resistant and rust proof materials
• Fully chlorine resistant
• Long-life double insulated impeller
• Water proof on/off switch
• U.K. 3pin moulded plug fitted.

For Your Safety the pump must be connected to the electrical supply via a Residual Current Device (RCD).