Water mattress draining kit, 1300

1. Put the shaft of the pump into the chuck of your electric hand drill and use your hand drill as the motor for the pump.
2. Screw the universal air and water tight blue end on to your mattress.
3. Just push your 1/2" garden hose to the other side of the pump to take the water away to your nearest drain point.
4. It's much quicker and a more efficient method of draining your waterbed than vacuum pumps or siphoning.

Just order the draining kit by itself, or if you need a hose extension to take the water away to your nearest drain point, we have them in 10, 15 or 30 meter lengths on the previous page which you could order at the same time.

Included

• drill driven water pump
• self priming
• rated max 1300 litres per hour (Moderately fast)
• approximately 1.5 metres of 1/2" hose
• 1/2" mattress adapter
• 2x 1/2" jubilee clips
• it is already assembled for use
• instructions.